Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
E2E Deployment and Operations Guide with Switchless Networking: Microsoft HCI Solutions from Dell Technologies
Deployment Introduction Solution Overview Solution Deployment Switchless Architecture with Network ATC
Switchless Architecture with Network ATC
Configure host networking
Setup IPs manually on SMB NICs
Creating a cluster
Creating network intents for switchless
Enabling Storage Spaces Direct
Configuring the host management network as a lower-priority network for live migration
Updating the page file settings
Configuring a cluster witness
Best practices and recommendations
Enabling bit locker
Recommended next steps
Deployment services
References GPU Integration Day 1 operations Managing and monitoring clusters with Windows Admin Center Dell OpenManage Integration with Windows Admin Center Updates and maintenance References

Creating a cluster

Creating a cluster

  • Ensure all nodes are reachable using the management IPs set in the previous step.

    Create a cluster using the New-Cluster cmdlet. 
    New-Cluster -Name clusterName -Node node1,node2,node3,node4 -StaticAddress 172.18.50.110 -NoStorage  -Verbose

    #Create a Witness on a file share or Azure
    Set-ClusterQuorum -FileShareWitness \\fileShare\share