Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
E2E Deployment and Operations Guide with Scalable Networking (Windows)
Deployment Introduction Solution Overview Solution Deployment
Solution Deployment
Solution deployment introduction
Deployment prerequisites
Change operating system to iDRAC pass-through IPs Install OpenManage Integration with Microsoft Windows Admin Center
Predeployment configuration
Configuring network switches Configuring iDRAC and BIOS Configure Intel E810 NICs
Operating system deployment
Manual operating system deployment Factory-installed operating system deployment Configure host networking
Install roles and features
Change the hostname
Joining cluster nodes to an Active Directory domain
Verifying and updating firmware and software compliance with the Azure Stack HCI catalog
Configuring firewall settings
Network integration overview Scalable Architecture Additional guidance for all configurations Deploying and Configuring a Host Cluster Persistent Memory for Windows Server HCI Day 1 operations Managing and monitoring clusters with Windows Admin Center Dell OpenManage Integration with Windows Admin Center Updates and maintenance

Operating system deployment

Operating system deployment

  • These instructions are for manual deployment of the Windows Server 2019 or Windows Server 2022 operating system. Unless otherwise specified, perform the steps on each physical node in the infrastructure that will be a part of Azure Stack HCI.

    Note: The steps in the subsequent sections are applicable to either the full operating system or Server Core.
    Note: The command output that is shown in the subsequent sections might show only Mellanox ConnectX-4 LX adapters as physical adapters. The output is shown only as an example.