In the Scale Unit tab of the Deployment Worksheet, you must provide the following network addresses to support the Azure Stack Hub deployment process. The deployment team uses the Deployment Worksheet to break out the IP networks into all the smaller networks that the system requires.
In this example, we complete the Scale Unit tab of the Deployment Worksheet with the values that are shown in the following table:
Table 1. Scale Unit tab example values
BMC Subnet (BMC network)
Infrastructure Subnet (Infrastructure network)
Switch Infra Subnet (Switch infrastructure network)
TOR BGP ASN
After you have filled in all fields in the Scale Unit tab, run the Generate function of the Deployment Worksheet PowerShell module (Action > Generate). The Generate function creates two new tabs: