The following figure shows the port assignments for FC connectivity. The ports that are marked are used to connect the PowerEdge R740 servers. Ports 4 and 5 on both switches are used to connect Dell EMC storage.
Figure 3. Connectivity between PowerEdge R740 server and Connectrix switches
Connect the cables of the dual-port Emulex LightPulse LPe31002 cards on the PowerEdge R740 server as follows:
Unity 650F storage has two 16 Gb/s FC ports from each controller for the front‑end connectivity. Connect one port from each controller to switch 1 and connect the remaining port from each controller to switch 2.
The following two figures illustrate the connections between the storage and the switches.
Figure 4. Connectivity between Unity 650F storage and Connectrix switches
Figure 5. Connectivity between Unity 650F storage and Connectrix switches
The Dell EMC Data Domain DD6300 uses the 10 GbE cabling link to Networking switches, as illustrated in the following figure. You can find additional installation and racking details for the DD6300 in the Dell EMC Data Domain DD6300 System Installation Guide.
Figure 6. DD6300 and Networking switches connectivity