This guide describes the steps for deploying Dell EMC Ready Stack for Microsoft Hyper-V on Windows Server 2016 on the following Dell EMC products: 14G PowerEdge Rack servers, Unity storage, S-Series and Connectrix switches, and the Integrated Data Protection Appliance (IDPA). This guide addresses deployment only. For information about the Ready Stack architecture, see the Dell EMC Ready Stack: Microsoft Hyper-V on PowerEdge 14G Servers and Unity Storage Design Guide.
Dell EMC takes no responsibility for any issues that may be caused to existing infrastructure components during the deployment of the Ready Stack. While deviations from the recommended configuration in this guide might be necessary to meet unique requirements, no warranty is implied or given as to the operation of the Dell EMC Ready Stack when it is deployed in a modified configuration.
This guide is for Dell EMC personnel, channel partners, and customers. It provides sample deployment information that Dell EMC Engineering used to test and validate the Ready Stack. Deployment of individual technology components that are mentioned in this guide might require specific training, certification, competencies, and other prerequisites. Deployment personnel must have the required prerequisites and knowledge of data center infrastructure best practices for servers, storage, networking, data protection, power, and cooling. To learn more about product competency training and requirements, contact your Dell EMC Partner or Dell EMC Services.