Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Dell EMC Ready Stack for Red Hat OpenShift Container Platform 4.2
Introduction
Solution overview Web console Document purpose Audience We value your feedback

Document purpose

  • Note: This deployment guide may contain language from third party content that is not under Dell's control and is not consistent with Dell's current guidelines for Dell's own content. When such third party content is updated by the relevant third parties, this guide will be revised accordingly.

    This guide describes the infrastructure that is required to deploy and operate OpenShift Container Platform and provides a validated process for deploying a production-ready OpenShift Container Platform cluster. The guide provides the information that you need to facilitate readiness for Day 2 operations. Topics that the guide addresses include:

    • Setting up switch configuration
    • Preparing the CSAH node
    • Installing OpenShift and creating a cluster
    • Scaling OpenShift cluster nodes
    • Platform user authentication
    • Deploying applications
    • Setting routes for applications
    • OpenShift cluster monitoring

    This guide provides a reference design for deploying version 4.2 of OpenShift Container Platform on Dell EMC PowerEdge servers and Dell EMC Networking switches. Dell EMC strongly recommends that you complete the validation steps that the guide describes and ensure that you are satisfied that your application can operate smoothly before proceeding with development or production use.

    For more information, see the Red Hat OpenShift Container Platform 4.2 Documentation.

next

Audience