Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Dell EMC Ready Solutions for Oracle with XtremIO X2 and Data Domain
Compute, Management, Network, and Data Domain Initial Setup
Preparing PowerEdge servers Local disk drive configuration BIOS configuration Recommended slots for NICs and HBAs Configuring Dell EMC Networking S4048-ON ToR switches Configuring zoning on FC switches Data Domain backup appliance initial system setup Configuration steps Example settings Example management settings Example VLTi settings Example Oracle public and backup and recovery interfaces and VLAN settings Example Oracle private interconnect interface and VLAN settings Configuring the management switch Installing ESXi and vCenter Server Appliance on the management server Reviewing Prerequisites Mounting the ESXi image Installing VMware ESXi Configuring the ESXi management network Deploying vCenter Server Appliance

Preparing PowerEdge servers

  • To prepare the PowerEdge servers for the production, XVC, virtual, and management environments in this Ready Solutions for Oracle, follow these procedures:

    1. Configure the local hard disk drives.
    2. Configure the BIOS settings.
    3. Review the recommended slots for NICs and HBAs.

next

Local disk drive configuration