Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deploying SingleStore Database on Dell PowerFlex 3.6
Introduction Product overview Solution architecture
Overview
Logical architecture
Network design
PowerFlex design
SingleStore design
SingleStore cluster deployment on PowerFlex Testing and validation Conclusion Appendix Best practices References

Network design

Network design

  • The following figure shows the logical layout of the PowerFlex rack, access, and aggregation with management aggregation architecture:

     

    Figure 4.        PowerFlex network architecture

    All nodes are connected to two Dell PowerSwitch S-5248F switches that are configured with VLT to enable interconnectivity and fault tolerance. All nodes are outfitted with two dual-port Mellanox 25 GbE NICs that provide four 25 GB ports on each server. One port from each NIC is connected to one switch and the other port is connected to the second switch. Moreover, ports are NIC teamed to provide high availability.

    Per standard practices outlined for PowerFlex deployment, dedicated VLANs are used for vMotion, managing the hypervisor, customer network, PowerFlex, and so on.