Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell VxRail Network Planning Guide
Introduction Plan the VxRail network VxRail Cluster Types VxRail feature-driven decision points VxRail hardware and switch selection decision points Prepare the data center to implement VxRail Plan the VxRail cluster implementation
Plan the VxRail cluster implementation
Decide on VxRail single point of management
Decide on VxRail network traffic segmentation
Decide on teaming and failover policies for VxRail networks
Plan the VxRail logical network
IP address considerations for VxRail networks VLAN considerations for VxRail networks
Plan network settings for VxRail management components
Plan network settings for VMware vCenter Server management network
Identify IP addresses for VxRail management components
Select hostnames for VxRail management components
Select a top-level domain Select a hostname for VxRail Manager Select the ESXi hostnames Select a hostname for the VxRail-managed VMware vCenter Server
Identify external applications and settings for VxRail
Set the DNS for VxRail management components
Prepare the customer-managed VMware vCenter Server
Prepare a customer-managed virtual-distributed switch
Prepare LAG on a customer-managed virtual-distributed switch
Reserve IP addresses for VxRail-managed VMware vSphere vMotion network
Reserve IP addresses for VxRail vSAN network
Decide on VxRail logging solution
Assign passwords for VxRail management
Planning vSAN Witness Networking Planning VxRail Satellite Nodes Networking Configure the Network for VxRail Prepare to build the VxRail cluster VxRail network considerations after implementation Appendix A: VxRail Network Configuration Table Appendix B: VxRail Passwords Appendix C: VxRail cluster setup checklist Appendix D: VxRail Open Ports Requirements Appendix E: VMware VDS port group default settings Appendix F: Physical Network Switch Examples

Select hostnames for VxRail management components

Select hostnames for VxRail management components

  • Each of the VxRail management components you deploy in the VxRail cluster requires you to assign an IP address, and assign a fully qualified hostname.

    During initialization, each of these VxRail management components are assigned a hostname and IP address.

    Determine the naming format for the hostnames to be applied to the required VxRail management components: each ESXi host, and VxRail Manager. If you deploy the VMware vCenter Server in the VxRail cluster, that also requires a hostname. In addition, if you decide to deploy Log Insight in the VxRail cluster that needs a hostname as well. You cannot change the hostnames and IP addresses of the VxRail management components after initial implementation.