Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell VxRail Network Planning Guide
Introduction Planning your data center network for VxRail VxRail cluster types VxRail feature-driven decision points VxRail hardware and switch selection decision points Prepare data center for VxRail implementation Planning the VxRail cluster implementation Planning for VxRail satellite nodes Configure the network for VxRail Preparing to build the VxRail cluster VxRail network considerations after implementation
Introduction
Using unassigned physical ports for VxRail networks
Configure link aggregation on VxRail networks
Appendix A: VxRail Network Configuration Table Appendix B: VxRail Passwords Appendix C: VxRail Cluster Setup Checklist Appendix D: VxRail Open Ports Requirements Appendix E: Virtual Distributed Switch Portgroup Default Settings Appendix F: Physical Network Switch Examples

Introduction

Introduction

  • This section provides guidance on additional actions that can be performed on the VxRail cluster networks upon the completion of the initial implementation process. Each section cases to optimize VxRail cluster operations.

    The choices you have to modify the VxRail networking after the completion of the initial implementation phase depend on the VxRail version of your cluster, and potentially the configuration settings and supported features on your data center network.