Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell VxRail Network Planning Guide
Introduction Planning Your Data Center Network for VxRail VxRail Cluster Types VxRail Feature-Driven Decision Points VxRail Hardware and Switch Selection Decision Points Preparing Data Center for VxRail Implementation Planning the VxRail Cluster Implementation Planning for VxRail Satellite Nodes
Introduction
Plan networking to support VxRail satellite node management
Assign network settings to VxRail satellite nodes
Assign passwords for VxRail satellite nodes
Configuring the Network for VxRail Preparing to Build the VxRail Cluster VxRail Network Considerations After Implementation

Assign network settings to VxRail satellite nodes

Assign network settings to VxRail satellite nodes

  • Every VxRail satellite node must be assigned an IP address and hostname for management purposes. Use the table in Appendix A: VxRail Network Configuration Table to capture these settings for up to three satellite nodes.

    Network Configuration Table Rows 80 and 81

    Enter the management IP address and hostname for the first satellite node

    Network Configuration Table Rows 82 and 83

    Enter the management IP address and hostname for the second satellite node

    Network Configuration Table Row 84 and 85

    Enter the management IP address and hostname for the third satellite node