Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell VxRail Network Planning Guide
Introduction Plan the VxRail network VxRail Cluster Types VxRail feature-driven decision points VxRail hardware and switch selection decision points Prepare the data center to implement VxRail Plan the VxRail cluster implementation Planning vSAN Witness Networking Planning VxRail Satellite Nodes Networking
Planning VxRail Satellite Nodes Networking
Plan networking to support VxRail satellite node management
Assign network settings to VxRail satellite nodes
Assign passwords for VxRail satellite nodes
Configure the Network for VxRail Prepare to build the VxRail cluster VxRail network considerations after implementation Appendix A: VxRail Network Configuration Table Appendix B: VxRail Passwords Appendix C: VxRail cluster setup checklist Appendix D: VxRail Open Ports Requirements Appendix E: VMware VDS port group default settings Appendix F: Physical Network Switch Examples

Assign network settings to VxRail satellite nodes

Assign network settings to VxRail satellite nodes

  • Every VxRail satellite node must be assigned an IP address and hostname for management purposes.

    Use the table in Appendix A: VxRail Network Configuration Table to capture these settings for up to three satellite nodes.

    Table 38. Network Configuration Table
    Network configuration table Action
    Row 77 and 78 Enter the management IP address and hostname for the first satellite node.
    Row 79 and 80 Enter the management IP address and hostname for the second satellite node.
    Row 81 and 82 Enter the management IP address and hostname for the third satellite node.