Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell VxRail Network Planning Guide
Introduction Planning Your Data Center Network for VxRail VxRail Cluster Types VxRail Feature-Driven Decision Points VxRail Hardware and Switch Selection Decision Points Prepare Data Center for VxRail Implementation Planning the VxRail Cluster Implementation Planning vSAN Witness Networking Planning VxRail Satellite Nodes Networking
Introduction to satellite nodes networking
Plan networking to support VxRail satellite node management
Assign network settings to VxRail satellite nodes
Assign passwords for VxRail satellite nodes
Configure the Network for VxRail Preparing to Build the VxRail Cluster VxRail Network Considerations After Implementation Appendixes

Assign network settings to VxRail satellite nodes

Assign network settings to VxRail satellite nodes

  • Every VxRail satellite node must be assigned an IP address and hostname for management purposes. Use the table in Appendix A: VxRail Network Configuration Table to capture these settings for up to three satellite nodes.

    Network Configuration Table

    Action

    Rows 77 and 78

    Enter the management IP address and hostname for the first satellite node.

    Rows 79 and 80

    Enter the management IP address and hostname for the second satellite node.

    Row 81 and 82

    Enter the management IP address and hostname for the third satellite node.