Home > Edge > Manufacturing Edge > Guides > Dell Validated Design for Manufacturing Edge with PTC - Design Guide > Scaling, infrastructure, and migration tasks
If you intend to update a Windows machine’s SCSI controller, some additional configuration steps are required prior to the update and after the update to get your machine back to an operational state.
Prior to editing your machine’s SCSI controller settings, perform the following steps:
VM Disk Name | OS Disk Name | Disk Function |
Hard disk 1 | sda | Boot disk |
Hard disk 2 | sdb | Data disk |
Hard disk 3 | sdc | Log disk |
This task explains how to mount the log disk and configure the PostgreSQL logs to the new location.
For more information about this directory, see Install and Configure PostgreSQL for RHEL.
Grant InfluxDB ownership of the location and permissions by performing the following commands:
dir = /media/data0/influxdb/meta
dir = /media/data0/influxdb/data
wal-dir = /media/data0/influxdb/wal