Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell PowerEdge MX Deployment with VMware Cloud Foundation Deployment Guide
Notes, cautions, and warnings Audience and Scope Overview Hardware Overview Validated Components Physical Layout Pre-deployment Requirements Networking Requirements SmartFabric Network Configuration VMware Cloud Foundation and SDDC Design Considerations Deploy VMware ESXi to Cluster Nodes VMware Cloud Builder and SDDC Deployment VMware Virtual Cloud Foundation Deployment Using Cloud Builder VMware VCF Post-installation Validation Troubleshooting - VMware ESXi and VCF VMware ESXi CLI Commands Manual Switch Configuration (Optional) Versions Used in This Guide
Versions Used in This Guide
References

Versions Used in This Guide

Versions Used in This Guide

  • The following tables include the hardware, software, and firmware used to configure and validate the scenarios and topologies in this guide.

     Table 8.    Dell  PowerEdge MX7000 chassis and components
    ItemVersion
    PowerEdge MX7000 chassisN/A
    PowerEdge MX740c sledA01
    PowerEdge M9002m modules (2 per chassis)1.30.10
    Networking MX9116n FSE (1 per chassis)10.5.2.5
    Networking MX7116n FEM (1 per chassis)N/A
     Table 9.    Dell  PowerEdge MX740c compute sled details 
    ItemFirmware version
    PowerEdge MX740c sled1.30.10 baseline
     Table 10.    VMware  details 
    ItemVersion
    ESXi -  Dell  Customized7.0U2, build 17867351
    ESXi depot (update)7.0U2, build 18426014
    Cloud Builder4.3.1.0 18624509
    Note: The  Dell  customized ESXi 7 installer ISO for ESXi 7.0 U2 used is:  VMware-VMvisor-Installer-7.0.0.update02-17867351.x86_64-DellEMC_Customized-A05.iso .

    For more information about PowerEdge baselines, refer to Dell PowerEdge MX7000 Solution Baselines.