Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking SmartFabric Services with VxRail vSAN Stretched Cluster Reference Architecture
Introduction Topology Deployment planning Switch configuration Other infrastructure Deploy VxRail
Deploy VxRail
Disable VxRail Manager Integration
Configure a jump host port
Deploy VxRail
Reenable VxRail Manager Integration
Configure VxRail vSAN stretched cluster Deploy OMNI Validated components Support and Feedback

Reenable VxRail Manager Integration

Reenable VxRail Manager Integration

  • Note: The VxRail Manager Integration setting will be renamed to mDNS in a future release.

    After deploying VxRail, reenable VxRail Manger Integration in the SFS UI for Site 1 as follows:

    1. Select Global Settings > Fabric Settings.
    2. Click EDIT.
    3. Set VxRail Manager Integration to Enable, as shown.
      Figure 3. VxRail Manager Integration set to Enable
    4. Click SUBMIT > OK.
    5. Repeat the steps above in the SFS UI for Site 2.