Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking SmartFabric Services Deployment with VxRail 7.0.400
Introduction Hardware used in this guide
Hardware used in this guide
Dell PowerSwitch S5248F-ON
Dell PowerSwitch S5232F-ON
Dell PowerSwitch N3248TE-ON
Dell VxRail nodes
VxRail node network adapters
External switches
Topology Deployment Planning Configure the First Leaf Switch Pair Deploy First VxRail Cluster Expand to Multirack Add a second VxRail cluster Deploy and Configure OMNI Validated Components CLI Commands Cisco Nexus External Switch Configuration Example Support and Feedback

Dell VxRail nodes

Dell VxRail nodes

  • Dell VxRail P, V, S, E, and G series nodes are built on current PowerEdge servers.

    Figure 6. Dell VxRail 1U E series node
    Dell EMC VxRail 1U E series node
    Note: VxRail supports cluster sizes up to 64 nodes. With SFS, VxRail clusters must have a minimum of three nodes. Two-node VxRail clusters are not currently supported.