In this section, the VLANs are configured as shown in the VLAN IDs and IP addresses table.
Create the External Management VLAN, vMotion, vSAN, VM Network, and Internal Management VLANs. Enable jumbo frames on the VLANs using the mtu 9216 command.
When configuring the VLANs for a VxRail deployment, make sure to configure the ipv6 mld snooping querier command on the VxRail node discovery VLAN 3939. This is a requirement for node discovery in VxRail.
Table 7.
Configure VLANs – dual switch with VLT
interface vlan1811
description External_Mgmt
no shutdown
mtu 9216
interface vlan1812
description vMotion
no shutdown
mtu 9216
interface vlan1813
description vSAN
no shutdown
mtu 9216
interface vlan1814
description VM_Network_A
no shutdown
mtu 9216
interface vlan1815
description VM_Network_B
no shutdown
mtu 9216
interface vlan3939
description Internal_Mgmt
no shutdown
ipv6 mld snooping querier
mtu 9216 |
interface vlan1811
description External_Mgmt
no shutdown
mtu 9216
interface vlan1812
description vMotion
no shutdown
mtu 9216
interface vlan1813
description vSAN
no shutdown
mtu 9216
interface vlan1814
description VM_Network_A
no shutdown
mtu 9216
interface vlan1815
description VM_Network_B
no shutdown
mtu 9216
interface vlan3939
description Internal_Mgmt
no shutdown
ipv6 mld snooping querier
mtu 9216 |