Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell EMC Networking SmartFabric Services Deployment with VxRail 7.0.202 Deployment Guide
Notes, cautions, and warnings Introduction Hardware Used in this Guide Topology Deployment Planning Configure the First Leaf Switch Pair
Cabling
Configure leaf switch OOB management interfaces
Enable SmartFabric
Connect to the SmartFabric UI
Update fabric and switch names
Configure L2 uplinks to the external network
Configure L3 routed uplinks to the external network
Configure a jump host port
Deploy First VxRail Cluster Expand to Multirack Add a second VxRail cluster Deploy and Configure OMNI Validated Components CLI Commands Cisco Nexus External Switch Configuration Example Support and Feedback

Cabling

Cabling

  • Cable the switches and VxRail nodes for the first cluster, as shown in the figure below, and power on all devices.

    Figure 11. VxRail node and leaf switch connections

    For connection details, see Figure 8. Also, make OOB management connections, as shown in Figure 10.