Follow the steps below to install the SD-WAN Edge 620 system in the standard configuration.
Step 1. Connect the power
Connect the power adapter to an AC power outlet. Connect the other end of the power adapter to the power port on the SD-WAN Edge 620 system. When the SD-WAN Edge 620 system powers ON, verify that the status LED on the front of the SD-WAN Edge 620 system is illuminated.
Step 2. Connect to the Internet
Connect an Ethernet cable to an available Internet connection, and then connect the cable to one of the four ports labeled GE3, GE4, GE5, or GE6.
Step 3. Follow email instructions
Step 4. Connect local devices
Connect the local devices such as desktops, phones, or switches to any of the LAN ports. Connectivity through the SD-WAN Edge 620 Wi-Fi is also available.
velocloud-XXX
where
XXX
is the last three digits of the service tag. The default password for the Wi-Fi connection is
vcsecret
. Consult with your IT administrator before connecting any devices to the
SD-WAN Edge 620 system.