The first step in the update procedure is to make sure the iDRAC firmware of the scale unit nodes and HLH are at the correct level. Log into each iDRAC for the HLH and scale unit nodes to validate the current firmware versions.
On 13G servers, any firmware that is less than version 184.108.40.206 will need to be updated. The iDRAC firmware versions contained in the 1906 release for 13G is 220.127.116.11 for scale unit nodes and HLH.
For 14G scale unit nodes, any firmware that is less than version 18.104.22.168 will need to be updated. The iDRAC firmware versions contained in the 1906 release for 14G is 22.214.171.124 for scale unit nodes and HLH.
The following screen shot displays a 13G R730xd server with an out-of-date iDRAC version. The iDRAC firmware version on a 14G R740xd system will appear in the iDRAC’s System Information section of the Dashboard.
Figure 4. Server Information screen
On a 13G system, the job queue looks similar to the following screen shot:
Figure 5. Job Queue screen
On a 14G system, the job queue looks similar to this:
Figure 6. Maintenance screen
Figure 7. Firmware Update screen
Figure 8. Maintenance screen
This update is non-disruptive and does not require a server reboot, but it will reset the iDRAC when completed.
Figure 9. Update Details screen
Figure 10. Server Information screen
The following screen shot is similar to what you should see on a 14G system after the iDRAC has rebooted:
Figure 11. System Information screen