Dell EMC Integrated System hybrid is available pre-racked in a Dell Technologies rack and PDU. Optionally, you can order the Dell EMC Integrated System hybrid without the rack and PDU, and integrate it into a customer-provided dedicated rack and PDU.
Note: If you use a customer-provided rack and PDU, the customer must ensure that they have the required power and space for serviceability. For information, see Environmental requirements.
If the customer-provided rack and PDU option is selected, Dell Technologies configures the servers in its factory. It then ships the components in a mini-transport rack that is designed for convenient transport and availability of the components. The following figure shows a four-node Dell EMC Integrated System—hybrid in a mini rack.
Dell Technologies service installs the components into the customer-provided rack before completing the deployment. The following table lists the number of mini racks that are shipped based on the number of SUs that are ordered.
Dell EMC Integrated System configuration
Required mini racks
The following figures show the switch and server placement for a 4-node minimum configuration up to a 16-node configuration. The solution comes pre-racked, stacked, and cabled, ready for a Dell Technologies Engineer to configure into your data center and to complete the deployment as an IaaS platform. Additional Dell Technologies consulting services are available to help you tailor the solution.