Dell EMC Integrated System hybrid is available pre-racked in a Dell Technologies rack and PDU. Optionally, you can order the Dell EMC Integrated System hybrid without the rack and PDU, and integrate it into a customer-provided dedicated rack and PDU.
If the customer-provided rack and PDU option is selected, Dell Technologies configures the servers in its factory. It then ships the components in a mini-transport rack that is designed for convenient transport and availability of the components. The following figure shows a four-node Dell EMC Integrated System—hybrid in a mini rack.
Dell Technologies service installs the components into the customer-provided rack before completing the deployment.
The following table lists the number of mini racks that are shipped based on the number of SUs that are ordered.
Table 27. Configuration mini-rack requirements
Dell EMC Integrated System configuration
Required mini racks
The following figures show the switch and server placement for a 4-node minimum configuration up to a 16-node configuration. The solution comes pre-racked, stacked, and cabled, ready for a Dell Technologies Engineer to configure into your data center and to complete the deployment as an IaaS platform. Additional Dell Technologies consulting services are available to help you tailor the solution.
Figure 8. Minimum hybrid configuration elevation: 4-node SU
Figure 9. Maximum hybrid configuration elevation: 16-node SU
Figure 10. Hybrid configuration: Single phase PDU
Figure 11. Hybrid configuration: Three-phase Delta PDU
Figure 12. Hybrid configuration: Three-phase Wye PDU