Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Architecture Guide—VMware Cloud Foundation 4.2 on VxRail 7.0
Prepare for VMware Cloud Foundation Management VI Workload Domain
Introduction Provide a temporary IP address for Cloud Builder Select the settings for the management workload domain Provide global settings for management VI workload domain Select the settings for NSX-T host overlay network Create Forward and Reverse DNS Entries for the management VI workload domain Select the NSX-T host overlay VLAN Select names for resource pools in VI Management workload domain Select names for portgroups in VI Management workload domain Prepare passwords Obtain VMware license keys

Select the NSX-T host overlay VLAN

    • The NSX-T host overlay VLAN must be configured on the adjacent top-of-rack switches connected to the VxRail nodes.
    • The NSX-T host overlay VLAN must pass through the trunk ports connected to the VxRail nodes.
    • Depending on where the Layer 2/ Layer 3 boundary is in the supporting physical network, pass the NSX-T host overlay VLAN upstream through the uplinks on the adjacent top-of-rack switches to the spine switch layer.
    • IP addresses must be assigned to the switches at the Layer 2/ Layer 3 boundary to enable routing.
    • Configure IGMP Snooping and an IGMP Querier on the adjacent top-of-rack switches.

next

Select names for resource pools in VI Management workload domain