Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Architecture Guide—VMware Cloud Foundation 4.2 on VxRail 7.0
Prepare for Cloud Foundation VI Workload Domain
Introduction Prepare NSX-T host overlay network Capture settings for VI workload domain Prepare for vSphere for Tanzu Workload Domain Prepare for Multi-Region with NSX-T Federation

Prepare NSX-T host overlay network

  • Each VI workload domain requires at least one VLAN for the NSX-T host overlay network, and connect to a host overlay network. The VLAN drives the Transport Zone selection the VI workload domain can be a member of.

    • Best practice is to configure a new VLAN for each VI workload domain to support the NSX-T host overlay network.
    • Applying the same VLAN to each VxRail cluster added to the VI workload domain ensures that all VxRail nodes are members of the host overlay network.
    • Follow these tasks for a new VLAN for the NSX-T host overlay network:
    • Configure the VLAN on the adjacent leaf switches providing connectivity to the VxRail nodes.
    • Add the VLAN to each trunked port on the adjacent leaf switches providing connectivity to the VxRail nodes.
    • Ensure connectivity to a DHCP server supplying the IP addresses for the NSX-T edge uplinks.

next

Capture settings for VI workload domain