Home > Workload Solutions > SQL Server > Guides > Deployment Guide—Ready Bundle for Microsoft SQL Server 2016 > Configuring Dell EMC Networking S4048-ON switches
Configure the Networking S4048-ON top and S4048-ON bottom switches, one at a time, as follows:
To access the console, connect one end of the serial cable to the console port on the S4048-ON switch, and the other end to the terminal server (laptop).
Syntax: hostname <name>
configure
hostname <name>
exit
Syntax: username <username> password <password> privilege <privilege level>
configure
username admin password <password> privilege 15
exit
configure
interface ManagementEthernet 1/1 ip address <xxx.xxx.xxx.xxx/xx>
no shutdown
exit
FTOS(conf) username admin privilege 15 password 0 <yourpassword>
FTOS(conf) enable password level 15 0 <yourpassword>
FTOS configure
FTOS(conf)interface range tengigabitethernet 1/1 – 1/48
FTOS(conf-if-range-te-1/1-1/48) switchport
FTOS(conf-if-range-te-1/1-1/48) no shutdown
FTOS(conf-if-range-te-1/1-1/48) exit
FTOS(conf)
exit
FTOS configure
FTOS(conf) interface range tengigabitethernet 1/1 – 1/48
FTOS(conf-if-range-te-1/1-1/48) mtu 12000
FTOS(conf-if-range-te-1/1-1/48) spanning-tree rstp edge-port
FTOS(conf-if-range-te-1/1-1/48) exit
FTOS (conf) interface Port-channel 1
FTOS (conf-if-po-1) mtu 12000
FTOS (conf-if-po-1) switchport
FTOS(conf-if-po-1) no shutdown
FTOS(conf-if-po-1) exit
FTOS(conf) interface range fortyGigE 1/49-1/50
FTOS (conf-if-range-fo-1/49-1/50) no ip address
FTOS (conf-if-range-fo-1/49-1/50) mtu 12000
FTOS (conf-if-range-fo-1/49-1/50) no shutdown
FTOS (conf-if-range-fo-1/49-1/50) flowcontrol rx on tx off
FTOS (conf-if-range-fo-1/49-1/50) port-channel-protocol lacp
FTOS (conf-if-range-fo-1/49-1/50-lacp) port-channel 1 mode active
FTOS (conf-if-range-fo-1/49-1/50-lacp) exit
FTOS (conf-if-range-fo-1/49-1/50) exit
FTOS (conf) exit
configure interface vlan 10 description “host-management”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port- channel 1
tagged tengigabitethernet 1/1 – 1/4
no shutdown
exit
configure interface vlan 20 description “Cluster”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port- channel 1
tagged tengigabitethernet 1/5 – 1/8
no shutdown
exit
configure interface vlan 30 description “Live Migration”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port- channel 1
tagged tengigabitethernet 1/9 – 1/12
no shutdown
exit
configure interface vlan 50 description “Application Network”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port-channel 1
tagged tengigabitethernet 1/13 – 1/16 no shutdown
exit
configure interface vlan 60 description “Front End Network”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port-channel 1
tagged tengigabitethernet 1/17 – 1/20
no shutdown
exit
configure interface vlan 70 description “SQL Private Network”
ip address <xxx.xxx.xxx.xxx/xx>
tagged port-channel 1
tagged tengigabitethernet 1/21 – 1/24 no shutdown
exit
FTOS copy running-config startup-config
Verify the Networking S4048-ON switch configuration as follows:
show vlt brief
show interfaces port-channel 100
show vlan
show interfaces port-channel 100 brief