Connect the VxRail V670F nodes to the network starting with ports 1 and 2 on the switch. Add additional management nodes using open ports in ascending order (left to right) on the switch, as shown in the following figure.
Home > Workload Solutions > Safety & Security > Guides > Genetec > Configuration Best Practices—Dell storage solution with Genetec Security Center > Connecting the VxRail V670F nodes
Connect the VxRail V670F nodes to the network starting with ports 1 and 2 on the switch. Add additional management nodes using open ports in ascending order (left to right) on the switch, as shown in the following figure.