Home > Storage > PowerScale (Isilon) > Product Documentation > Cloud > APEX File Storage for AWS: Deployment Guide > Set up the cluster
Now that you have completed the AWS infrastructure deployment, you need to access the command line of the cluster first node to complete the cluster formation. This can be accomplished in different ways, including:
This guide uses the AWS EC2 serial console of the first node to set up the cluster. See the AWS documentation Connect to the EC2 Serial Console for more details. When you connect to the cluster first node, complete the cluster setup using the following steps.
Note: Cluster nodes can take several minutes to start up for the first time. If you get an error when connecting to and authenticating with OneFS, wait a few more minutes and then try again.
# isi status
# isi devices node list
# isi devices node add SV200-930073-0001 --async
Check the cluster status by running the following command and wait for the cluster and node health to report a status of OK before you proceed.
# isi status
# isi devices node add SV200-930073-0002 --async
Check the cluster status by running the following command and wait for the cluster and node health to report a status of OK before proceeding.
# isi status
# isi devices node add SV200-930073-0003 --async
Check the cluster status by running the following command and wait for the cluster and node health to report a status of OK before proceeding.
# isi status
# isi status
Now, you have completed all steps to deploy an APEX File Storage for AWS cluster. It is highly recommended to refer to APEX File Storage for AWS Getting Started Guide in Dell Technologies Support website for more details about OneFS.