E2E Deployment and Operations Guide with Scalable Networking (Windows)

• 1

  About using this guide

• 1

  Deployment Introduction
• 2

  Document overview
• 3

  Audience and scope
• 4

  Known issues

• 1

  Solution Overview
• 2

  Solution introduction
• 3

  Deployment models
  • Scalable infrastructure
• 4

  Solution integration and network connectivity

• 1

  Solution Deployment
• 2

  Solution deployment introduction
• 3

  Deployment prerequisites
  • Change operating system to iDRAC pass-through IPs
  • Install OpenManage Integration with Microsoft Windows Admin Center
• 4

  Predeployment configuration
  • Configuring network switches
  • Configuring iDRAC and BIOS
  • Configure QLogic NICs
  • Configure Intel E810 NICs
• 5

  Operating system deployment
  • Manual operating system deployment
  • Factory-installed operating system deployment
  • Configure host networking
• 6

  Install roles and features
• 7

  Change the hostname
• 8

  Joining cluster nodes to an Active Directory domain
  • Verifying and updating firmware and software compliance with the Azure Stack HCI catalog
• 9

  Configuring firewall settings

• 1

  Network integration overview
• 2

  Configuring host networking

• 1

  Scalable Architecture
• 2

  Scalable architecture for Dell Solutions for Microsoft Windows Server HCI
• 3

  Fully converged network configuration
  • Deployment instructions for fully converged network configuration
• 4

  Non-converged network configuration
  • Storage on physical adapters
  • Storage using SET

• 1

  Additional guidance for all configurations
• 2

  Enable jumbo frames
• 3

  Update network adapter advanced properties
• 4

  RDMA configuration
• 5

  VLAN
• 6

  QoS policy configuration

• 1

  Deploying and Configuring a Host Cluster
• 2

  Overview of host clusters
  • Creating the host cluster
  • Enabling Storage Spaces Direct
  • Configuring the host management network as a lower-priority network for live migration
  • Updating the page file settings
  • Configuring a cluster witness
• 3

  Best practices and recommendations
  • Disable SMB Signing
  • Update the hardware timeout for the Spaces port
  • Enable jumbo frames
• 4

  Enabling bit locker
• 5

  Recommended next steps
• 6

  Deployment services

• 1

  Persistent Memory for Windows Server HCI
• 2

  Configuring persistent memory for Windows Server HCI
  • Persistent memory requirements
  • Configuring persistent memory BIOS settings
• 3

  Configuring Windows Server HCI persistent memory hosts
  • Managing persistent memory using Windows PowerShell

• 1

  Day 1 operations
• 2

  Day 1 operations overview
• 3

  Known issues
• 4

  Microsoft HCI Solutions from Dell Technologies overview
• 5

  Deployment guidance
• 6

  PAL and DPOR registration for Azure Stack
• 7

  Creating virtual disks

• 1

  Managing and monitoring clusters with Windows Admin Center
• 2

  Overview
• 3

  Access the HCI cluster
• 4

  View server details
• 5

  View drive details
• 6

  Managing and monitoring volumes
  • Creating volumes in Storage Spaces Direct
  • Managing volumes
• 7

  Enabling data deduplication on Storage Spaces Direct
• 8

  Monitoring and managing VMs
• 9

  Managing virtual switches

• 1

  Dell OpenManage Integration with Windows Admin Center
• 2

  Overview
• 3

  Prerequisites for managing AX nodes
• 4

  Installing the OMIMSWAC license
• 5

  Managing Microsoft HCI-based clusters
  • Overview
  • Prerequisite checks
  • Health status
  • Inventory
  • Locating physical disks and viewing their status
  • Viewing update compliance and updating the cluster
• 6

  Full Stack Cluster-Aware Offline Updating
• 7

  Full Stack Cluster-Aware Updating for Azure Stack HCI clusters using the OpenManage Integration snap-in
• 8

  Updating a standalone node before adding it to the cluster
• 9

  Enabling hardware alerts for HCI cluster
• 10

  Secure cluster with Secured-core
• 11

  Enabling operating system features
• 12

  Protect your infrastructure with infrastructure lock
  • Enable or disable infrastructure lock
• 13

  Manage CPU cores in Azure Stack HCI clusters
• 14

  Validate and remediate Azure Stack HCI clusters
  • View HCP compliance summary
• 15

  View recommendations for storage expansion
  • View node level storage configuration details
• 16

  Known issues

• 1

  Updates and maintenance
• 2

  Firmware and driver updates using the manual method
  • Preparing for maintenance operations
  • Placing an AX node in maintenance mode
  • Obtaining the firmware catalog for AX nodes or Ready Nodes using Dell Repository Manager
  • Updating the AX node by using iDRAC out of band
  • Updating the out-of-box drivers
  • Exiting the AX node from maintenance mode
• 3

  Restarting a cluster node or taking a cluster node offline
• 4

  Expanding the Azure Stack HCI cluster
  • Azure Stack HCI node expansion
  • Storage Spaces Direct storage expansion
• 5

  Extending volumes
• 6

  Performing AX node recovery
  • Configuring RAID for operating system drives
• 7

  Operating system recovery
  • Manual operating system recovery
  • Factory operating system recovery
  • iDRAC Service Module (iSM) for AX nodes and Storage Spaces Direct Ready Nodes
  • FullPowerCycle