Dell EMC PowerEdge MX VMware ESXi with SmartFabric Services Deployment Guide

• 1

  Notes, cautions, and warnings

• 1

  Overview
• 2

  Introduction
• 3

  Hardware overview
• 4

  Rack switches used in this guide
• 5

  Servers used in this guide
• 6

  MX9116n topology used in this guide
• 7

  Alternative MX5108n topology for single chassis

• 1

  Configuring Leaf Switches
• 2

  Switch configuration commands

• 1

  Configure PowerEdge MX using OME-M

• 1

  vCenter settings

• 1

  Network Connectivity Between VMs
• 2

  MX server sled VM to remote server VM connectivity
• 3

  Configuration steps
• 4

  VM to VM communication between MX server sleds

• 1

  Connect PowerEdge MX VMs to storage over Fibre Channel switch

• 1

  Use Direct Attach Method to connect MX VMs to storage

• 1

  Validation from OME-M and CLI
• 2

  Dell EMC PowerSwitch S5232F-ON validation
• 3

  MX9116n FSE Fibre Channel validation commands
• 4

  Validation of SmartFabric deployment using OME-M
• 5

  MX9116n FSE CLI commands
• 6

  ESXi validation using VM to VM ping

• 1

  Troubleshooting VM to VM traffic

• 1

  Other VMware Considerations

• 1

  Full Switch Mode Example

• 1

  Configure a Virtual Distributed Switch

• 1

  Storage Considerations

• 1

  Versions Used in this Guide

• 1

  Dell Technologies documentation
• 2

  OME-M and OS10 compatibility and documentation
• 3

  Support and feedback