Home > Integrated Products > VxRail > Guides > Planning Guide—VMware Cloud Foundation 5.1 on VxRail > Appendix E: Cloud Builder and management VI workload configuration
This table lists the configuration settings that are required by Cloud Builder to deploy the Cloud Foundation management workload domain on the VxRail cluster platform.
Category | Detail | Description |
Cloud Builder | IP Address | Temporary for Cloud Builder virtual appliance |
NTP | IP Address | |
DNS | IP Address | |
SSO Site Name | Must be the same site name as used for the VxRail cluster. | |
SSO Domain |
| |
DNS Zone Name |
| |
SDDC | Manager | Hostname |
IP Address | ||
Domain Name | ||
NSX | Manager (VIP) | Hostname |
IP Address | ||
Manager Node 1 | Hostname | |
IP Address | ||
Manager Node 2 | Hostname | |
IP Address | ||
Manager Node 3 | Hostname | |
IP Address | ||
Appliance Size | (Small, Medium, Large) | |
Static IP Assignment Method | Name of static IP address pool | |
IP address range in CIDR format | ||
Starting IP address to be assigned for host overlay network | ||
Ending IP address to be assigned for host overlay network | ||
Gateway | ||
Dynamic IP Assignment Method | IP address of DHCP server to assign IP addresses to VTEP tunnel endpoints for host overlay network | |
Range of IP addresses in DHCP server to be assigned to VTEP tunnel endpoints for host overlay network | ||
vSphere Objects | Data Center Name | Must match value in VxRail cluster |
Cluster Name | Must match value in VxRail cluster | |
VxRail Distributed Switch Name(s) | Must match values used in the VxRail cluster | |
NSX Distributed Switch Name | If deploying separate VDS for NSX networking. VDS name must be unique in the VxRail cluster. | |
vSAN Datastore Name | Must match value used in the VxRail cluster | |
vSphere Resource Pools | SDDC Management | Required for consolidated architecture |
SDDC Edge | Required for consolidated architecture | |
User Edge | Required for consolidated architecture | |
User VM | Required for consolidated architecture |