Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Guides > Implementation Guide—Red Hat OpenShift Container Platform 4.14 on AMD-powered Dell Infrastructure > Configuring the switches
This section provides steps for configuring the Dell Networking OS10 initial out-of-band (OOB) management IP address.
Modify the sample configuration files as necessary, and then copy the modified switch file to the switches as running-config. Perform the following steps:
OS# configure terminal
OS(config)# hostname S5232F-1
S5232F-1(config)# interface mgmt 1/1/1
S5232F-1(conf-if-ma-1/1/1)# no shutdown
S5232F-1(conf-if-ma-1/1/1)# no ip address dhcp
S5232F-1(conf-if-ma-1/1/1)# ip address 192.168.33.44/24
S5232F-1(conf-if-ma-1/1/1)# exit
S5232F-1(config)# management route 0.0.0.0/0 192.168.33.1
2, Modify the sample switch configuration in <git clone dir>/examples as necessary (see Switch connectivity).
3. Repeat the preceding steps for switch S5232F-2 and switch S3148, ensuring that the appropriate switch configuration file is copied and the IP addresses are correspondingly modified.
To use Container Storage Interface (CSI) drivers that support the FC protocol:
Copy the FC switch configuration file to the Dell Connectrix switches.