Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
End to end vSAN deployment with RDMA
Executive summary Introduction End-to-end configuration for vSAN with RDMA
Network configuration and setup
High Level Overview PCP + PFC + ECN configuration Example PCP + PFC configuration Example
PowerEdge server BIOS and NIC Firmware configurations
ESXi driver parameters
vSAN configuration
A vSAN with RDMA integration
Hardware/Software Details
Best Practices for vSAN with RDMA Conclusion Glossary References

Network configuration and setup

Home > Integrated Products > vSAN Ready Nodes > White Papers > End to end vSAN deployment with RDMA > Network configuration and setup

Network configuration and setup

  • Following are the switch level settings to enable RDMA from an OS10 supported switch version that you can find page 1653 from OS10 Online Documentation.