Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
E2E Deployment and Operations Guide with Switchless Networking (Windows)
About using this guide Deployment Introduction Solution Overview Solution Deployment Network integration overview Switchless Architecture Additional guidance for all configurations
Additional guidance for all configurations
Enable jumbo frames
Update network adapter advanced properties
RDMA configuration
VLAN
QoS policy configuration
Deploying and Configuring a Host Cluster Persistent Memory for Windows Server HCI Day 1 operations Managing and monitoring clusters with Windows Admin Center Dell OpenManage Integration with Windows Admin Center Updates and maintenance Secure connect gateway

RDMA configuration

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 22H2 and earlier > E2E Deployment and Operations Guide with Switchless Networking (Windows) > RDMA configuration

RDMA configuration

  • Storage Spaces Direct hyper-converged Infrastructures with Mellanox ConnectX-4 LX, Mellanox ConnectX-5, Mellanox ConnectX-6 DX, Nvidia ConnectX-6 LX, Intel E810 25 GbE, Intel E823 10/25 GbE (AX-4510/AX-4520) only, and QLogic FastLinQ 41262 adapters use converged network design and RDMA for storage traffic.

    It is important to ensure that the physical and virtual adapters used for storage traffic have RDMA enabled. 

    # Variables for the scenario
    $StorageAdaptersAll = @('SLOT 1 PORT 1', 'SLOT 1 PORT 2', 'vEthernet (Storage1)', 'vEthernet (Storage2)')
    Enable-NetAdapterRdma -Name $StorageAdaptersAll