-
Preparing for maintenance operations
Use the following PowerShell commands to ensure that all the requirements are met before proceeding with the maintenance operation of an AX node in an Azure Stack HCI cluster. These steps ensure that all the requirements are met and that no faults exist before placing an AX node into maintenance mode. - Verify that all nodes in the cluster are available, run the
Get-clusternode
command. - Verify that all cluster networks are available, run the
Get-ClusterNetwork
command. - Verify that the cluster status is healthy. Run the following commands:
Get-ClusterS2D
Get-StoragePool
Get-ClusterPerformanceHistory -FriendlyName *Cluster* | Get-StorageHealthReport
- Verify that all the physical and virtual drives are healthy. Run the following commands:
Get-physicaldisk
Get-virtualdisks
- Run the
Get-storagejob
command to verify that no back-end repair jobs are running.