Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
E2E Deployment and Operations Guide with Stretched Cluster: Integrated System for Microsoft Azure Stack HCI
About using this guide Introduction Solution overview Solution deployment
Solution deployment
Introduction
Install roles and features
Configuring a cluster witness
Registry settings
Deployment prerequisites for stretched clusters
Customer network team requirements
Design principles and best practices
Validated network topology
Creating a stretched cluster Virtual Machines Failure/Recovery from failure of Site/Node Appendices Day 1 operations Managing and monitoring clusters with Windows Admin Center Dell OpenManage Integration with Windows Admin Center Updates and maintenance References

Customer network team requirements

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 22H2 and earlier > E2E Deployment and Operations Guide with Stretched Cluster: Integrated System for Microsoft Azure Stack HCI > Customer network team requirements

Customer network team requirements

  • Depending on the network configuration chosen, customers should ensure that the requisite end-to-end routing is enabled for inter-site communication. A minimum of one IP route or three IP routes based on Basic or High Throughput configuration is required for the environment.

    Depending on the network configuration, the customer network team may also need to add static routes on the switches or on Layer-3 to ensure site-to-site connectivity.