Overview of host clusters | E2E Deployment and Operations Guide with Scalable Networking (Windows) | Dell Technologies Info Hub

Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below

Overview of host clusters

Overview of host clusters

Thank you for your feedback!

After joining the cluster nodes to an Active Directory domain, you can create a host cluster and configure it for Storage Spaces Direct.
- Creating the host cluster
  Verify that the nodes are ready for cluster creation, and then create the host cluster.
- Enabling Storage Spaces Direct
  After you create the cluster, run the Enable-ClusterS2D cmdlet to configure Storage Spaces Direct on the cluster. Do not run the cmdlet in a remote session; instead, use the local console session.
- Configuring host management network as a lower-priority network for live migration
  After you create the cluster, live migration is configured by default to use all available networks.
- Updating the page file settings
  To help ensure that the active memory dump is captured if a fatal system error occurs, allocate sufficient space for the page file. Dell Technologies recommends allocating at least 50 GB plus the size of the CSV block cache.
- Configuring a cluster witness