Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
E2E Deployment and Operations Guide - Cluster Creation Using Windows Admin Center (WAC)
About using this guide Introduction
Introduction
Document overview
Audience and scope
Known issues
Solution Overview Solution deployment References Day 1 operations Managing and monitoring clusters with Windows Admin Center Dell OpenManage Integration with Windows Admin Center Updates and maintenance Secure connect gateway References

Audience and scope

Home > Integrated Products > Microsoft HCI Solutions from Dell Technologies > Guides 22H2 and earlier > E2E Deployment and Operations Guide - Cluster Creation Using Windows Admin Center (WAC) > Audience and scope

Audience and scope

  • The audience for this document includes systems engineers, field consultants, partner engineering team members, and customers with knowledge about deploying hyperconverged infrastructures with the Azure Stack HCI operating system, Hyper-V, and Storage Spaces Direct.

    Note: The instructions in this deployment guide are applicable to the Azure Stack HCI operating system only.

    Note: The Cluster Creation feature using Windows Admin Center is generally available and fully supported by Microsoft. However, from a Dell Technologies Solutions perspective, the Cluster Creation feature using Windows Admin Center is in preview.

    If you encounter any issues during Cluster Creation using Windows Admin Center, Dell recommends that you use the PowerShell method for Cluster Creation that is described in the Microsoft HCI Solutions from Dell Technologies: End-to-End Deployment with Switchless Networking or Microsoft HCI Solutions from Dell Technologies: End-to-End Deployment with Scalable Networking. If you encounter additional issues, contact Dell Support for assistance.