The show ip route command shows the routes in the default VRF. The output includes all leaf pair VTEP IP addresses and router IDs. The IPv6 addresses shown are automatically configured link-local addresses that are used as part of the unnumbered BGP feature for the leaf-spine connections.
Spine1# show ip route
Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF
> - selected route, * - FIB route, q - queued route, r - rejected route
Destination Gateway Dist/Metric
--------------------------------------------------------------------------------
B>* 10.0.0.1/32 via fe80::8e47:beff:fead:2311 Eth1/2 20/0
* via fe80::b24f:13ff:fe2b:6aa2 Eth1/1
B>* 10.0.0.2/32 via fe80::b24f:13ff:fe2b:5ea2 Eth1/4 20/0
* via fe80::b24f:13ff:fe2b:89a2 Eth1/3
B>* 10.0.0.3/32 via fe80::b24f:13ff:fe37:9c2 Eth1/5 20/0
* via fe80::b24f:13ff:fe37:fc2 Eth1/6
B>* 10.0.0.4/32 via fe80::b24f:13ff:fe36:50c2 Eth1/7 20/0
* via fe80::b24f:13ff:fe36:df42 Eth1/8
B>* 10.1.1.1/32 via fe80::b24f:13ff:fe2b:6aa2 Eth1/1 20/0
B>* 10.1.1.2/32 via fe80::8e47:beff:fead:2311 Eth1/2 20/0
B>* 10.1.1.3/32 via fe80::b24f:13ff:fe2b:89a2 Eth1/3 20/0
B>* 10.1.1.4/32 via fe80::b24f:13ff:fe2b:5ea2 Eth1/4 20/0
B>* 10.1.1.5/32 via fe80::b24f:13ff:fe37:9c2 Eth1/5 20/0
B>* 10.1.1.6/32 via fe80::b24f:13ff:fe37:fc2 Eth1/6 20/0
B>* 10.1.1.7/32 via fe80::b24f:13ff:fe36:50c2 Eth1/7 20/0
B>* 10.1.1.8/32 via fe80::b24f:13ff:fe36:df42 Eth1/8 20/0
C>* 10.2.2.1/32 Direct Loopback0 0/0