PowerFlex R650 appliances and PowerFlex R650custom nodes are built on the current generation of Dell PowerEdge servers. The deployment example in this guide uses DellPowerFlex R650 S (Storage) and PowerFlex R650 C (Compute) nodes. Each PowerFlex node in this deployment has 2 x 25 GbE dual-port SFP28 adapters, an embedded 1 GbE BASE-T dual-port NIC, and an iDRAC.
Note:PowerFlex appliances and PowerFlexcustom nodes are supported for this deployment. PowerFlex R640 nodes are also supported, provided they have two 25 GbE dual-port SFP28 adapters. PowerFlex R640 nodes used as PowerFlex management controllers must also have a 1 GbE BASE-T NIC available in addition to the iDRAC. PowerFlex compute nodes with three 25 GbE dual-port SFP28 adapters are also supported.