シングル ラックとはリーフ スイッチが2個しかないトポロジーを示します。
マルチラックとは、4個以上のリーフ スイッチを持つトポロジーを示します。
Dell Technologies Enterprise SONiC導入時のPowerFlexの最小ネットワーキング要件は次のとおりです。
- シングル ラック導入では、サポートされている同じモデルのDell PowerSwitchリーフ スイッチが2台必要です。 注: シングル ラックからマルチラック トポロジーへの将来の拡張が考えられる場合、 デル・テクノロジーズ, Dell Technologiesは、サポートされている2台の Dell PowerSwitchスパイン スイッチをインストールして構成することを推奨します。そうすることで、将来の拡張プロセスがシンプルになります。
- マルチラック導入では、ラックあたり2台のサポートされている同じモデルのDell PowerSwitchリーフ スイッチ、さらに少なくとも2台のサポートされているDell PowerSwitchスパイン スイッチが必要です。
- ファブリック内のすべてのDell PowerSwitchリーフ システムとスパイン システムは、同じバージョンのDell Technologies Enterprise SONiCを実行している必要があります。
- Dell Technologies Enterprise SONiC 4.1.1以降が必要です。この導入には、EnterpriseスタンダードまたはEnterpriseプレミアム バンドルが必要です。
- OOB管理接続用の1 GbE BASE-Tスイッチが1台必要です。デル・テクノロジーズ, Dell Technologiesは、ラックごとに1台のPowerSwitchN3248TE-ONを使用することを推奨します。
- PowerFlexノード管理ネットワークから到達可能な1台のDNSサーバーと、1台のNTPサーバーが必要です。
- 各PowerFlexノード, PowerFlex nodeは、リーフ スイッチへの25 GbE SFP28接続が4系統必要です。
- リーフからスパインへの各接続には、100 GbE QSFP28接続が少なくとも1系統必要です。
- リーフ スイッチ ペアー間のMC-LAGピア リンクには、フォールト トレランスのために少なくとも2系統の接続が必要です。各リンクは、25 GbE SFP28、100 GbE QSFP28、または200 GbE QSFP28-DD(S5248F-ONで利用可能)にすることができます。25 GbEポートを使用する場合で、スイッチがオフラインになっている場合、Dellは少なくとも4系統の接続により十分な帯域幅を確保することを推奨します。
- 各スイッチOOB管理ポートに1 GbE (1000BASE-T)接続が1系統必要です。
- 各PowerFlexノード, PowerFlex node iDRACポートに1 GbE (1000BASE-T)接続が1系統必要です。
- 各PFMCノードがiDRACポートに加えてOOB管理ネットワークにアクセスするには、1 GbE (1000BASE-T)接続が1系統必要です。