- 専用管理ポートを設定します。 この例では、 interface Management 0を使用します。
- スイッチ固有のOOB管理ネットワークにIPアドレスを設定します。 OOB管理ネットワークでルーティングが使用されている場合は、ゲートウェイ アドレスを指定します。
リーフ1A リーフ1B interface Management 0
description "OOB mgmt port"
ip address 100.67.124.189/24 gwaddr 100.67.124.254interface Management 0
description "OOB mgmt port"
ip address 100.67.124.190/24 gwaddr 100.67.124.254PowerFlexノード, PowerFlex nodeに接続されている各Ethernetインターフェイスについて、次を実行します。 - 説明を入力します。
- 最適なパフォーマンスを得るために、MTUサイズを9216バイトに設定します。
- インターフェイスを、該当するポート チャネルにバインドします。
- インタフェースを有効にします。
リーフ1A リーフ1B interface Eth1/1
description "To SO node NIC0:1"
mtu 9216
channel-group 1
no shutdown
!
interface Eth1/2
description "To SO node NIC0:1"
mtu 9216
channel-group 2
no shutdown
!
interface Eth1/3
description "To CO node NIC0:1"
mtu 9216
channel-group 3
no shutdown
!
interface Eth1/4
description "To CO node NIC0:1"
mtu 9216
channel-group 4
no shutdown
!
interface Eth1/5
description "To SO node NIC3:2"
mtu 9216
channel-group 5
no shutdown
!
interface Eth1/6
description "To SO node NIC3:2"
mtu 9216
channel-group 6
no shutdown
!
interface Eth1/7
description "To CO node NIC3:2"
mtu 9216
channel-group 7
no shutdown
!
interface Eth1/8
description "To CO node NIC3:2"
mtu 9216
channel-group 8
no shutdown
!
interface Eth1/9
description "To PFMC node NIC0:1"
mtu 9216
channel-group 9
no shutdown
!
interface Eth1/10
description "To PFMC node NIC0:1"
mtu 9216
channel-group 10
no shutdown
!
interface Eth1/11
description "To PFMC node NIC0:1"
mtu 9216
channel-group 11
no shutdown
!
interface Eth1/13
description "To PFMC node NIC2:2"
mtu 9216
channel-group 13
no shutdown
!
interface Eth1/14
description "To PFMC node NIC2:2"
mtu 9216
channel-group 14
no shutdown
!
interface Eth1/15
description "To PFMC node NIC2:2"
mtu 9216
channel-group 15
no shutdowninterface Eth1/1
description "To SO node NIC3:1"
mtu 9216
channel-group 1
no shutdown
!
interface Eth1/2
description "To SO node NIC3:1"
mtu 9216
channel-group 2
no shutdown
!
interface Eth1/3
description "To CO node NIC3:1"
mtu 9216
channel-group 3
no shutdown
!
interface Eth1/4
description "To CO node NIC3:1"
mtu 9216
channel-group 4
no shutdown
!
interface Eth1/5
description "To SO node NIC0:2"
mtu 9216
channel-group 5
no shutdown
!
interface Eth1/6
description "To SO node NIC0:2"
mtu 9216
channel-group 6
no shutdown
!
interface Eth1/7
description "To CO node NIC0:2"
mtu 9216
channel-group 7
no shutdown
!
interface Eth1/8
description "To CO node NIC0:2"
mtu 9216
channel-group 8
no shutdown
!
interface Eth1/9
description "To PFMC node NIC2:1"
mtu 9216
channel-group 9
no shutdown
!
interface Eth1/10
description "To PFMC node NIC2:1"
mtu 9216
channel-group 10
no shutdown
!
interface Eth1/11
description "To PFMC node NIC2:1"
mtu 9216
channel-group 11
no shutdown
!
interface Eth1/13
description "To PFMC node NIC0:2"
mtu 9216
channel-group 13
no shutdown
!
interface Eth1/14
description "To PFMC node NIC0:2"
mtu 9216
channel-group 14
no shutdown
!
interface Eth1/15
description "To PFMC node NIC0:2"
mtu 9216
channel-group 15
no shutdownピア リーフ スイッチに接続されている各Ethernetインターフェイスについて、次を実行します。 - 説明を入力します。
- 最適なパフォーマンスを得るために、MTUサイズを9216バイトに設定します。
- インターフェイスを、MC-LAGポート チャネルにバインドします。 この例では、 channel-group 100を使用しています。
- インタフェースを有効にします。
リーフ1A リーフ1B interface Eth1/49
description "Peer link to Leaf 1B"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/50
description "Peer link to Leaf 1B"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/51
description "Peer link to Leaf 1B"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/52
description "Peer link to Leaf 1B"
mtu 9216
channel-group 100
no shutdowninterface Eth1/49
description "Peer link to Leaf 1A"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/50
description "Peer link to Leaf 1A"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/51
description "Peer link to Leaf 1A"
mtu 9216
channel-group 100
no shutdown
!
interface Eth1/52
description "Peer link to Leaf 1A"
mtu 9216
channel-group 100
no shutdown注: シングル ラック導入で、スパインを使用しない場合、ステップ11~15は必要ありません。
スパイン スイッチに接続されている各Ethernetインターフェイスについて、次を実行します。 - 説明を入力します。
- 最適なパフォーマンスを得るために、MTUサイズを9216バイトに設定します。
- インタフェースを有効にします。
- リンクローカル アドレスを使用した番号なしのBGPポイントツーポイント リンクをサポートするには、IPv6を有効にします。
- スパインへのアップストリーム リンクのリンク状態トラッキングを有効にします。 この設定は、スイッチのフェールオーバー時間を最小限に抑えるのに役立ちます。
リーフ1A リーフ1B interface Eth1/53
description "To Spine1"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/54
description "To Spine2"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/55
description "To Spine3"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/56
description "To Spine4"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstreaminterface Eth1/53
description "To Spine1"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/54
description "To Spine2"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/55
description "To Spine3"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream
!
interface Eth1/56
description "To Spine4"
mtu 9216
no shutdown
ipv6 enable
link state track mclag upstream境界リーフ スイッチでは、環境に応じて外部スイッチに接続されているインターフェイスを構成します。 PowerFlexリーフスパイン プロダクション トポロジーに示されているように、この構成はDNSおよびNTPサービスへのアクセスに、この導入例で使用されます。この例では、外部スイッチに接続されている各インターフェイスが次のように構成されています。 - 説明を入力します。
- MTUサイズを9216バイトに設定します(オプション)。
- インタフェースを有効にします。
- インターフェイスをテナントVRFにバインドします。
- 番号なしのBGPポイントツーポイント リンクをサポートするには、IPv6を有効にします。
リーフ1A リーフ1B interface Eth1/47
description "To ExternalA"
mtu 9216
no shutdown
ip vrf forwarding VrfTenant1
ipv6 enable
!
interface Eth1/48
description "To ExternalB"
mtu 9216
no shutdown
ip vrf forwarding VrfTenant1
ipv6 enableinterface Eth1/47
description "To ExternalA"
mtu 9216
no shutdown
ip vrf forwarding VrfTenant1
ipv6 enable
!
interface Eth1/48
description "To ExternalB"
mtu 9216
no shutdown
ip vrf forwarding VrfTenant1
ipv6 enable