「show ip route vrf vrf_name
」コマンドは、デフォルト以外のVRFのルートを表示します。出力には、すべてのPowerFlexレイヤー3ネットワークが含まれます。この例には、外部スイッチのルーターID、および外部レイヤー3ネットワーク192.168.10.0も含まれています。このルートは、DNSやNTPなどの外部サービスに使用されます。表示されるIPv6アドレスは、外部スイッチ接続の番号なしBGP機能の一部として使用されるリンクローカル アドレスとして自動的に構成されます。
Leaf1A# show ip route vrf VrfTenant1
Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF
> - selected route, * - FIB route, q - queued route, r - rejected route
Destination Gateway Dist/Metric
--------------------------------------------------------------------------------
B>* 10.3.0.1/32 via fe80::3e2c:30ff:fe84:8302 Eth1/47 20/0
B>* 10.3.0.2/32 via fe80::3e2c:30ff:fe84:8482 Eth1/48 20/0
B>* 192.168.10.0/24 via fe80::3e2c:30ff:fe84:8302 Eth1/47 20/0
* via fe80::3e2c:30ff:fe84:8482 Eth1/48
B>* 192.168.10.254/32 via fe80::3e2c:30ff:fe84:8482 Eth1/48 20/0
C>* 192.168.105.0/24 Direct Vlan105 0/0
C>* 192.168.140.0/24 Direct Vlan140 0/0
C>* 192.168.150.0/24 Direct Vlan150 0/0
C>* 192.168.161.0/24 Direct Vlan161 0/0
C>* 192.168.162.0/24 Direct Vlan162 0/0
マルチラック環境でのPowerFlexノード, PowerFlex nodes導入後、Destination
列には、他のラックにあるレイヤー3ネットワーク上のPowerFlexノード, PowerFlex nodes IPアドレスも含まれます。Gateway
列には、ノードに到達するために使用されるリモートVTEP IPアドレスが表示されます。Interfaces
列には、VRFテナントVLAN(この例では2001)が一覧表示されます。