Home > Networking Solutions > Modular/Blade Switches > MX-Series Modular Switches (PowerEdge MX) > Guides > Dell PowerEdge MX Deployment with VMware Cloud Foundation Deployment Guide > VMware Cloud Foundation cluster verification
Log in to VMware SDDC Manager using a web browser at: https://<ip address or DNS name>. The SSO user ID is administrator@vsphere.local
and the password is the one you specified during installation.
vsphere.local
. Do not use the DNS domain that was used for the Cloud Foundation deployment.Join VMware Customer Experience Improvement Program (CEIP) when prompted. CEIP provides statistical data to SDDC Manager, allowing for improved performance and troubleshooting.
The following figure shows a sample SDDC Manager dashboard. In this example, the host usage is yellow because the management cluster has consumed all of the hosts currently available to Cloud Foundation.
administrator@vsphere.local
. Verify that the cluster appears healthy and that there are no warnings.Validate that the VMs created during deployment are all up and running. Validate that your VSAN is running and available. Look at the disk groups that are created and ensure they are consistent with the disks available in the hosts. Look at the virtual networking components that are deployed to vCenter.