Perform the following steps to configure L2 uplinks to the external network.
After the uplink is configured, the Uplink page in the SFS UI displays as shown in the following figure.
To view configured interfaces and networks on the uplink, use the show smartfabric uplinks command at the leaf switch CLI.
S5248F-Leaf1A# show smartfabric uplinks
----------------------------------------------------------
Name : L2-to-external-network
Description :
ID : c4d28cec-494e-4c95-9101-1f468d9c3311
Media Type : ETHERNET
Native Vlan : 0
Untagged-network :
Networks : Mgmt-1811
Configured-Interfaces : 7DZP363:ethernet1/1/53, 7C0Q363:ethernet1/1/53, 7DZP363:ethernet1/1/54, 7C0Q363:ethernet1/1/54
----------------------------------------------------------