The VRRP ip address needs to be assigned to VLAN 1816 that was created. Follow the steps to assign the VRRP ip address using OMNI.
- In the vSphere Client, select Menu > OpenManage Network Integration.Note: You can alternatively access OMNI UI using the OMNI stand-alone page. Use the IP address of OMNI in a web browser and select LAUNCH OMNI FABRIC MANAGEMENT PORTAL.
- In the left pane, click the SmartFabric instance.
- In the right menu, select Network.
- Expand VLAN Networks. The network 1816 created before is displayed.
- Select network-1816, then click EDIT. The Edit Layer 3 VLAN Network : network-1816 window opens.
- Assign the Gateway IP Address.Note: In this example, 172.18.16.254 is used.
- Click EDIT.
- The success message is displayed as shown in the following figure:
Validate the VRRP address by running show vrrp brief command on switch Leaf1A.
S5248F-Leaf1A# show vrrp brief
Interface Group Priority Prempt State Version Master addr(s) Virtual addr
----------------------------------------------------------------------------------------------
vlan1816 IPv4 1 100 true master-state 2 172.18.16.253 172.18.16.254
Perform the following configurations in the external switches to change the default route of 172.18.11.0/24 to 172.18.16.254.
External-A | External-B |
|
|