Storage System Details – Cybersecurity
Storage System Details – Cybersecurity
-
The Cybersecurity tab is available for systems that have Cybersecurity enabled. Cybersecurity is supported for PowerMax, PowerStore, PowerEdge, and PowerProtect DD systems, and will continue to expand coverage to other Dell assets. The top of the page shows information provided in the multisystem view: The System Risk Level, the summary of active issues, and the percentage of enabled tests in the Evaluation Plan. The bottom of the page has two tabs: Cybersecurity Issues and Evaluation Plan.
The Cybersecurity Issues tab lists all active issues identified on this system. Expanding each issue provides a detailed issue description and the recommended remediation. Users can also see the time the issue was created, the security control family (defined by NIST 800-53 R5), and the name of the evaluation test.
The Evaluation Plan tab lists all possible tests for this system type. The evaluation tests are grouped into Security Control Families. Each family can be expanded to show the individual tests that make up the group and one of the following statuses for each test:
- OK – Test is enabled and no issues identified.
- Deviation – Test is enabled and an active issue exists.
- Not In Plan – Test is not enabled.
- Not Applicable – Test is for a capability that depends on another capability that is disabled.
- Not Supported – Test is not supported for the system version.
- Not Evaluated – Test is for a system where the Evaluation Plan is disabled, or the test has not yet been run.
When an active issue exists, the Last Detected Column shows the first time the issue was detected. When an issue does not exist, it shows the last time this data was changed (as reported by the system).
There is a details icon which shows the details of each test. In instances where there is a deviation, it will also show the recommended remediation.
The Security Advisories tab provides information about the applicable Dell Security Advisories that impact this system.
