Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell APEX AIOps Infrastructure Observability: A Detailed Review
Executive summary APEX AIOps Infrastructure Observability overview Home page Monitor Manage Optimize Reports Cybersecurity Storage System Details Block Object Details File Object Details Storage Group Details (PowerMax/VMAX systems) Node details PowerStore appliance details Quota details Hyperconverged infrastructure systems details Host details Connectrix and PowerSwitch Details Server details Infrastructure Observability administration Data protection details Appendix A: Enabling Infrastructure Observability at the system Converged Systems details Appendix B: APEX AIOps Infrastructure Observability security VMware Details Custom Tags
Introduction
Accessing tags
Editing tags
Filtering tags
Mobile application Appendix C: Data collection frequencies and samples Appendix D: Report Browser metrics

Accessing tags

Home > Storage > Data Storage Essentials > DataIQ and CloudIQ > Dell APEX AIOps Infrastructure Observability: A Detailed Review > Accessing tags

Accessing tags

  • System level tags can be seen in any of the multisystem views. Once systems are tagged, views can be filtered based on one or more tags. The following figure shows the multisystem view for capacity for storage. By hovering over the tag icon in the upper right corner of each card, the user can see the defined tags for the system.

     Multisystem view for storage highlighting the custom tags for an individual storage system.

    Users can also switch to the list view and see them under the Tags column. When the text in the Tags field exceeds the column width, a +X is shown where X is the additional number of tags defined for that system. To view the additional tags, hover over the +X.

    Custom tags for a storage systems when viewed in the list view.