Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Computer Vision on Microsoft Azure Stack HCI
Introduction Partner overview Solution overview Solution Architecture Overview Validation
Validation
Deploy CV/VMS applications on Azure Stack HCI
Performance on Azure Stack HCI
Connect Azure Stack HCI to PowerScale
Conclusions References

Connect Azure Stack HCI to PowerScale

Home > Workload Solutions > Computer Vision > White Papers > Computer Vision on Microsoft Azure Stack HCI > Connect Azure Stack HCI to PowerScale

Connect Azure Stack HCI to PowerScale

  • A question that we looked to answer is how do we still leverage the massively scalable PowerScale for offline video storage. High-volume video is typically saved locally for regulatory and cost saving purposes. To investigate this, we configured the long-term storage for the Milestone VMS.

    Results

    To test the connectivity from the Azure Stack to a PowerScale the Archive storage was configured using the typical SMB storage protocol.

    Figure 9. PowerScale configured as Archive storage
    This image shows PowerScale configured as Archive storage.

    Findings

    • All the use cases tested were successful and ran without errors or performance concerns . All simulated video was successfully streamed to the local Milestone Tier 1 storage, which is processed by both Ipsotek and BriefCam, and archived to the connected on-premises PowerScale without any warnings, errors, or failures.
    • The Milestone Tier 1 storage using Storage Spaces Direct three-way mirroring performed well with respect to latency and capacity for holding live data prior to archiving.