The AX nodes are factory-configured with optimized system BIOS and iDRAC settings. This preconfiguration eliminates the need for you to manually configure the settings to a recommended baseline.
The iDRAC in AX nodes can be configured to obtain an IP address from DHCP or can be assigned a static IP address. When the OOB network in the environment does not provide DHCP IP addresses, you must manually set a static IPv4 address on each iDRAC network interface. You can access the physical server console to set the addresses by using KVM or other means.
Note: For more details on BIOS and iDRAC settings recommendations, see BIOS and iDRAC configuration recommendations.